May. 12, 2025
Here are 5 benefits of cold working of steels that make a difference to your machining operations.
Xingtai Steel Product Page
Increased Strength
It is widely known that cold working strain changes the properties of most metals. When as rolled steel bars are cold worked by cold drawing through a die, a significant increase in yield and tensile strength is obtained. At the same time, The reduction in area and percent elongation are reduced.
The graph below shows the effect of cold drawing on the tensile properties of 1 inch round diameter steel bars.
There are two important lessons in this graph: 1) As strength properties increase, ductility measures decrease; 2) Up to about 15% cold reduction, yield strength increases at a much greater rate than tensile strength. The first 5% of cold work results in the greatest increase in strength.
Improved Surface Finish
Hot rolled steel bars are finished at high temperatures, and so the surface has a hard abrasive scale made up of various oxides of Iron. This scale is hard and abrasive ranging from 270 – DPH (Vickers) microhardness depending on the type of oxide (s) formed. In order to cold draw the bars, cold finshers typically remove the sacle by shot blasting or acid pickling. This results in the removal of the hard abrasive scale.
By pulling the bars though the die, the surface finish is also improved, with Cold Drawn bars typically running 50 microinches maximum and modern equipment typically working at 25-30 micro inches. Compare this to a roughness height of 250 or more for hot rolled bars.
Controlled Dimensions
Because the bars are cold reduced at room temperature by pulling through an oil lubricated die, the dimensional conformance of the steel is much more easily controlled. Typical tolerances for cold drawn 1 ” low carbon steel bars are +0.000″/ – 0.002″. this compares favorably to +/- 0.010 for hot rolled steel of the same chemistry and diameter. Concentricity is improved by the cold drawing operation.
Improved Straightness
The straightness of hot roll bars is generally 1/4″ max deviation in any 5 foot length. In cold drawn bars, depending on size and grade this deviation can be held to as little as 1/16″ in 10 feet.
Please see our post here for a more complete discussion of bar straightness.
Improved Machinability
Improved machinability is really the synergistic result of all of the above improvements made by cold work (cold drawing).
Higher yield to tensile ratio means the tool has less work to do to move the metal in the workpiece to its ultimate strength when it will separate as a chip. This translates into less force on the tool and greater tool life and productivity. Not putting hard abrasive scale and oxides into your cutting fluids nor on to your tool because the bar has been cleaned results in longer uptime and less maintenance for tools, workholding, and machines. More tightly controlled dimensions and concentricity means that the bars can be run at higher speeds without creating harmful vibrations and chatter. Finer tolerances can be held by your equipment when bars are sized properly going into the machine. Similarly, improved straightness results in less runout and permits higher speeds in production.
Bottom line: Hot roll bars may be cheaper by the pound, but machining them will cost your company a lot more because they lack the benefits of cold drawing:
What Makes Cold Rolled Steel Bar the Right Choice In engineering and industrial applications strength quality and dimensional precision become top selection criteria. The cold rolled steel bar delivers essential benefits at this point. Modern industries across all sectors rely on this material because of its proven reputation. This bar fits all industry requirements from small tools to large constructions. Its unique production method makes the steel bar stronger and more accurate. Many industries now choose cold rolled bars as their preferred steel form because of its strong benefits. Better Strength and Precision The steel material is rolled through a standard process that occurs at temperature level. The metal gains greater durability and stays steady throughout usage. The process results in both straightness and precise dimensions. People prefer this type of steel for areas that require precise dimensional integrity. Organizations using this material depend on product forms that stay firm under everyday stress. Despite being hot-rolled, cold rolled steel bars resist bending throughout their life. Stainless Steel Bright Bar factories use this production method to deliver their best-performing products. Smooth Surface Finish for Clean Results Cold rolled steel delivers a sleek polished surface that brings many benefits to users. The steel product accepts minimal additional work after manufacturing because it shows a polished appearance. Our metal receives effortless treatment because the surface remains easy to paint with and add protective coatings.
Contact us to discuss your requirements of cold rolled round bar. Our experienced sales team can help you identify the options that best suit your needs.
The food industry and dairy as well as sanitary sectors require stainless steel products with this polished look. The cold rolling process meets the needs of dairy fittings manufacturers along with sanitary valves and tri clamp manufacturers because they use it to make their essential components. The bars contribute to sanitary practices while creating attractive outcomes for the user. Reliable for High-Performance Environments Part performance strongly depends on the selection of materials. The material keeps its strength throughout heavy work, heavy loading, and continuous vibration conditions. The properties of these bars make them perfect for use in engineering projects and vehicle development. Projects rely on the supplies from Titanium Round Bar and Inconel Round Bar manufacturers when they need resistance against heat or corrosion elements. You can get excellent strength and precision at an affordable price by choosing cold rolled steel instead of other materials. Versatile Use Across Industries Different types of furniture depend on cold rolled steel bars while tool components also use it in manufacturing processes as well as farming equipment. The product proves effective in building both basic shapes and bolted structures. The product features both excellent durability and affordable cost making it useful for different applications. Companies that supply both Duplex Round Bar and super duplex plate as well as duplex flanges know that different applications need specific materials. The application of cold rolled bars matches needs that regular stainless steel or high-end alloys cannot handle.
Trusted by Leading Metal Suppliers Top suppliers of monel round bars and Hastelloy Plates as well as Inconel Plates maintain cold rolled bar inventory in their stock. Suppliers maintain cold rolled bars in stock because they remain sought after by different industries. These premium choices including Inconel 625 Tube work well with the product selection made by Copper Nickel Flanges manufacturers and sellers of duplex plate. Cold rolled bars come in various grades and sizes which helps workers choose the most suitable option for custom projects. Conclusion People who prioritize strength and precise results alongside a well-finished product should choose cold rolled steel bars. Manufacturers in both building and sanitary sectors put their trust in these items for their applications. Through Jignesh Steel you can get first-rate cold rolled bars and specialty metal products made from stainless steel, titanium, duplex and nickel alloys. Our supplies maintain enduring performance at both strong and exacting operational levels. Read more:- https://www.jigneshsteel.in/
The company is the world’s best a706 rebar supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
If you are interested in sending in a Guest Blogger Submission,welcome to write for us!
All Comments ( 0 )