Razor concertina wire manufactured by the following technologies. First, rolled galvanized steel coils by cold forging, made barbed tape - a metal band with a sharp cutting studs on both sides. Then, barbed tape on special equipment is crimped around the guide wire. As Aiming high carbon wire is commonly used spring wire. After crimping get razor wire concertina barbed tape, concertina barbed tape is practically one with the foundation, it can not in any way be separated from the carrier wire. The following two images are the barbed tape and steel wire state of before crimped and after crimping.

If you want to learn more, please visit our website.

Concertina razor wire is produced by modern automatic stamping complex of high quality materials that meet the required standards. Razor barbed tape manufactured by cold forming from galvanized steel coils with a thickness of 0.55 mm and galvanized high carbon spring rope wire or cable with a diameter of 2.5 mm.

Materials:

Steel Wire rope is made with a diameter of 0.2 to 4.0 mm, uncoated and galvanized. Rope wire is available in different thickness of the zinc coating - for medium and hard working conditions, in addition, cable wires on the mechanical properties divided by the highest and the first category. Our razor wire made of steel wire rope of the highest category with a zinc coating, designed for operation in harsh environments. Galvanized steel wire is intended for the manufacture of steel-aluminum, non-insulated cores and wires. Galvanized steel wire produced with diameters from 1.85 to 4.5 mm. Galvanized steel wire are made of three classes on the mechanical properties and the thickness of the two types of zinc coatings. Our razor barbed wire made from galvanized steel wire with maximum parameters - the ultimate tensile strength and thickness of the zinc coating.

Our razor barbed wire is manufactured only from high quality materials and the relevant rules. Barbed tape concertina is made of galvanized steel coils. In the manufacture of razor wire, we use galvanized steel coil thickness of 0.5 ... 0.59 mm for cold forming with uniform zinc coating.

All materials for the manufacture of razor fences and spiral razor have a protective zinc coating of sufficient thickness, and manufacturing technology to avoid damage to the surface during molding and compressing. By this means the life of our razor mesh fence is several times longer than standard razor wire.

BONKFC are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

The starting materials for razor production are galvanized steel strip, galvanized steel wire rope or spring, which has high strength and resilient properties, as well as haywire or steel strip for the manufacture of staples in the spiral obstacles production. The quality of raw materials largely determines the quality of razor wire concertina.

By cold forming from galvanized steel strip is produced with cutting tape located on both sides of studs having sharp cutting edges. After cutting this tape tightly crimped around the base - high carbon steel galvanized wire, this gives a little one-piece construction, no backlash and surface defects - concertina wire.

How is Razor Wire Made?

It is a common misconception that razor and barbed wire are the same. One is much more dangerous than the other, and thus uses vary. The two types can also be combined for the most serious security settings. Both are dangerous to handle, so you may wonder how each is made. Well, barbed wire is simpler and a little bit safer to manufacture. Barbed wire is assembled by twisting short sections of wire, leaving short spikes around the strips of wire that will form the rail or rails of the fence. Manufacturing razor wire is much more complicated.

Chain Link Fittings has both razor and barbed wire, arms, tools, and a carrier tool for razor and barbed wire. Arms hold the wire to posts or walls and are offered in various directions, and tools are used to handle and install the razor or barbed wire.

For more information about the razor or barbed wire application and which may be best for you, please contact our sales representative. They are happy to help in any way they can!

For more information, please visit Razor Wire factory.