Wire Sawing Services - Core & Saw inColorado,Texas and Wyoming.

Core & Saw began operations in Texas, Colorado over 15 years ago. During our work, we have significantly increased the range of services provided, and formed a professional and hardworking team of true masters of their craft. Wire saw cutting is one of our consistently performed types of work. Many customers come to us with various questions regarding concrete, and in particular, its sawing. Cutting concrete with a wire saw is in many cases the best way to solve such problems. The use of this equipment allows you to quickly cut or dismantle the most dimensional and large structures of various shapes.

Diamond wire cutting is done by pulling a flexible cutting tool through various hard materials. Using this method, you can saw reinforced concrete, masonry, metal structures and other objects. This technology is relatively silent and creates a minimal amount of vibration. If you cut concrete with a wire saw, you can create openings in thick walls (over 40 inches) and do this by positioning the equipment on one side of the wall.

Corediam Product Page

Use M16 chemical anchor bolts to fix the main tripod and auxiliary tripod of the wire saw. The guide wheels must be installed stably, and the edge of the wheels must be aligned with the center line of the rope hole to ensure the effective cutting speed of the cutting surface, strictly implement the installation accuracy requirements.

According to the determined cutting form, the diamond wire are wound around the driving wheel and the auxiliary wheel in a certain order. Note that the direction of the rope should be consistent with the driving direction of the driving wheel.

According to the on-site conditions, the connection of water, electricity, mechanical equipment and other related pipelines should be correctly standardized, relatively concentrated and placed, and the safety operating procedures should be strictly followed to prevent the chaos of many machines, many people, auxiliary equipment and materials, which may cause potential accidents. During the diamond wires cutting process, the direction of the wires movement must be protected by a safety guard, and safety signs should be set up in a certain area to remind pedestrians not to enter the construction area.

For more concrete diamond wire saw ropesinformation, please contact us. We will provide professional answers.

Start the electric motor, adjust the driving wheel lifting tension through the control panel, ensure that the diamond rope is properly tensed to supply circulating cooling water, and then start another electric motor to drive the driving wheel to drive the diamond wire rotary cutting. The stability of the frame must be closely observed during the cutting process, and the offset of the guide wheel must be adjusted at any time to ensure that the cutting wires are in the same plane.

During the cutting process, the cutting parameters are adjusted through the operation control panel to ensure that the diamond wires running line speed is about 20m/s. On the other hand, the amount of washing liquid should be ensured during the cutting process to ensure the cooling of the diamond wire and take away the grinding powder eyebrow. Cutting operation to achieve stable speed, stable parameters, stable equipment

Such as the occurrence of wires, broken wire and other phenomena should have corresponding measures to solve. Safety protection measures must be strict, otherwise the diamond beads on the broken diamond wires will fly out like a bullet and hurt people. Therefore, in addition to taking the necessary protective measures, the scene all refuse to observe unrelated personnel.

Contact us to discuss your requirements of diamond saw blade for stone cutting manufacturers. Our experienced sales team can help you identify the options that best suit your needs.